![]() Pull a few feet of rope from the rope reels. Remove the bolt from the coupler or the motor side of the slip clutch, whichever you have. Manually Cover the Pool: This requires two people. Some algicides contain detergent and may damage the cover. You can apply this solution directly on the algae. Make sure you use Clorox, not the pool’s chlorine. Use one (1) part Clorox to nine (9) parts water. Rinse well with fresh water.Īlgae: For algae stains, especially black algae, use a mixture of water and Clorox® bleach. Use the bar soap on a wet cloth and scrub the soiled area. One of the most available non-detergent cleaners is Ivory® bar soap (not dish-washing liquid). Oils and Stubborn Stains: For oils, such as suntan lotion, or stubborn stains that cannot be removed by scrubbing, use a small amount of non-detergent cleanser. Stains: For stains, use a soft bristle brush and scrub the cover with fresh, clean water. Even if the cover does not appear dirty, harmful chemical deposits can accumulate on top of the fabric and can cause premature fabric failure if the fabric is not rinsed regularly. Rinse: Regularly rinse the cover off with a pump in place to remove water and contaminants. Apply the patch in the same pattern as the vinyl on the cover.Allow the glue to set slightly until it becomes tacky.The smooth side of the vinyl should face out. Apply vinyl glue to the rough side of the patch and to the cover around the hole.Tip: You can use the excess fabric on the roller tube for patch material. Make all of the edges of the patch round. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |